DSpace Colección :
http://hdl.handle.net/20.500.14076/17456
2024-03-28T12:46:40ZMétodos multimalla V-ciclo Y F-ciclo para el problema biarmónico usando el elemento Hsieh-Clough-Tocher
http://hdl.handle.net/20.500.14076/17486
Título : Métodos multimalla V-ciclo Y F-ciclo para el problema biarmónico usando el elemento Hsieh-Clough-Tocher
Autor : Navarro Flores, Cristina; Echegaray Castillo, William Carlos
Resumen : Este trabajo presenta un estudio ordenado de los métodos multimalla para ecuaciones diferenciales de cuarto orden, usando el elemento finito conforme Hsieh-Clough-Tocher (HCT) para su discretización. Para el cual se elige como problema modelo al problema biarmónico de la losa de concreto armado, mostrándose su forma variacional, la existencia y unicidad de su solución. Se busca que la solución del problema sea lo suficientemente regular, para ello se amplía la búsqueda en espacios de Sobolev de índice fraccionario donde ya se sabe que el problema biarmónico tiene una regularidad elíptica α ∈ < ½, 1]. Se hace un estudio de los métodos multimalla, usando la teoría aditiva para mostrar la convergencia de los métodos V-ciclo y F-ciclo. Se adaptan los métodos multimalla para la discretización del elemento HCT y se demuestra que los métodos multimalla son convergentes para las ecuaciones diferenciales parciales de cuarto orden. Se muestran resultados numéricos de la convergencia de las multimallas,
verificándose el análisis teórico. Se comparan los resultados de los diferentes algoritmos multimallas algebraicos, se muestran resultados de la solución numérica para el problema de la losa de concreto armado, usando el elemento finito HCT y las multimallas V-Ciclo, W-Ciclo y F-Ciclo en la solución del sistema lineal resultante, finalmente se dan algunas sugerencias para la mejora de ellos.; This paper presents an orderly study of multigrid methods for fourth-order differential equations using the finite element as Hsieh-Clough-Tocher (HCT) for its discretization. To which is chosen as a model problem to biarmonic problem of reinforced concrete slab, showing its variational form, the existence and uniqueness of its solution. It is intended that the solution of the problem is regular enough, to do the search is expands in Sobolev spaces of fractional index where it is already known that the problem has an elliptical biarmonic regularly α ∈ < ½, 1]. A study of the multigrid methods is using the additive theory for show the convergence of V-cycle and F-cycle methods. They adapt the multigrid methods for the discretization of the element HCT and shows that are convergent multigrid ·
methods for partial differential equations of fourth order. It numerical results show the convergence of multi mesh, verifying the theoretical analysis. The results of different multigrid algebraic algorithms are compared, results of the numerical solution to the problem of reinforced concrete slab are shown, using the finite element multigrid HCT and V-cycle, W-cycle and F-cycle in the solution the resulting linear system, finally some suggestions for improving them.2013-12-01T00:00:00ZAnálisis de Transiciones de fase en un Ferromagneto ideal aplicando el Método Monte Carlo a los modelos de Ising y Heisenberg en 2 y 3 dimensiones
http://hdl.handle.net/20.500.14076/17484
Título : Análisis de Transiciones de fase en un Ferromagneto ideal aplicando el Método Monte Carlo a los modelos de Ising y Heisenberg en 2 y 3 dimensiones
Autor : Zegarra Borrero, Antonio Federico; Loro Ramírez, Héctor
Resumen : Se presentan resultados obtenidos al aplicar el Método Monte Carlo a los modelos de Ising y Heisenberg para un cristal en 2 y 3 dimensiones, donde se encontraron transiciones de fase ferromagnética. En particular se muestra el diagrama de fase de Magnetización (IMI) vs. Temperatura (T) del sistema Heisenberg 3D para 3 tipos de red (se, bcc y fcc) con el fin de visualizar dicho cambio de fase y calcular la respectiva temperatura crítica Tc. Luego se presentan en una tabla los valores de Tc obtenidos para los sistemas analizados (Ising 2D, Heisenberg 2D, Ising 3D y Heisenberg 3D), donde en los casos 3D se consideraron las estructuras cristalinas cúbicas mencionadas. Teniendo en cuenta que en una vecindad del punto crítico (T ≈ Tc, H ≈ O) las principales cantidades termodinámicas obedecen leyes de escala numéricamente para cada sistema los principales exponentes críticos (β, α, Y, ó) a partir de sus respectivos diagramas de fase, lo cual permitió verificar el fenómeno de universalidad para cada sistema 3 D.; Some results obtained from applying the Monte Carlo method to the models of Ising and Heisenberg for a crystal in 2 and 3 dimensions, where ferromagnetic phase transitions were detected, are presented. In particular, the Magnetization (IMI) vs. Temperature (T) phase diagram is shown for 3 kinds of lattices (se, bcc and fcc) for the Heisenberg 3D system in order to visualize the phase transition and calculate the respective critical temperature Tc. Then the values of Tc obtained for each of the analyzed systems (Ising 2D, Heisenberg 2D, Ising 3D y Heisenberg
3D) are presented in a table, where we considered for each 3D case the cubic crystalline structrures mentioned. Taking into account that in a vicinity of the critical point (T ≈ Tc, H ≈ O) the main thermodynamic quantities obey universal scaling laws, the main critical exponentes (β, α, Y, ó) were calculated numerically for each system from their respective phase diagrams, this permitted to verify the phenomenon of universality for each 3D system.2013-12-01T00:00:00ZEstudio estructural y microestructural de aleaciones FeZr nanocristalinas ricas en Fe obtenidas por mecano-síntesis
http://hdl.handle.net/20.500.14076/17483
Título : Estudio estructural y microestructural de aleaciones FeZr nanocristalinas ricas en Fe obtenidas por mecano-síntesis
Autor : Rocha Cabrera, R.; Pillaca, M.; Landauro, C. V.; Peña Rodríguez, V. A.; Medina Medina, J.
Resumen : En el presente trabajo se reporta un estudio de la caracterización estructural y microestructural de aleaciones nanocristalinas Fe/Zr obtenidas por mecano-síntesis de una mezcla de polvos elementales de Fe y Zr con una composición
nominal Fe23Zr6, Los resultados de difracción de rayos X y espectroscopia Mössbauer muestran que después de 12 horas de molienda se induce la formación de nanogranos de una fase α-Fe(Zr) con un remanente de α-Fe metálico inmersos en una fase amorfa (Fe23Zr6), con concentraciones de 35.24 %, 9.59 % y 55.17 %, respectivamente.; This paper reports a study of the structural and microstructural characterization of nanocrystalline Fe/Zr obtained by mechano-synthesis of a mixture of elemental Fe and Zr powders with a nominal composition of Fe23Zr6. The results of X ray diffraction and Mössbauer spectroscopy shows that after of 12 hours of milling, the formation of α-Fe(Zr) nan-grains is induced with a residual crystalline α-Fe metal in an amorphous phase (Fe23Zr6), with concentrations of 35.24 %, 9.59 % y 55.17 %, respectively.2013-12-01T00:00:00ZOptimizing energy consumption using Eucalyptus in the Cloud Computing environment
http://hdl.handle.net/20.500.14076/17481
Título : Optimizing energy consumption using Eucalyptus in the Cloud Computing environment
Autor : Castillo Cara, José Manuel; Tenorio Trigoso, Alonso
Resumen : This document will try to analyze the functionalities that the infrastructures of Cloud Computing, in this case Eucalyptus, offer, as well as propose a new algorithm within the system of the Cloud Controller and Cluster Controller; in which we will succeed to save a considerably large energy consumption due to the requirements of the Anal user and we have to considerer the charge that the system of the virtualizer of the machines has once it is switched on.; Este documento tratará de analizar las funcionalidades que las infraestructuras de Cloud Computing, en este caso la que nos ofrece Eucalyptus, así como proponer un nuevo algoritmo en el sistema del controlador de la nube y el controlador Clúster; en el cual se reduce considerablemente un consumo de energía debido a las necesidades del usuario final y tenemos que considerar la carga de que el sistema del virtualizador de las máquinas tiene una vez que se conecta.2013-12-01T00:00:00Z