Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/20.500.14076/10348
Título : Evaluación de variables significativas en la flotación de relaves magnéticos
Autor : Tapia Zavala, Ricky Fernando
Asesor : Suárez Sánchez, María Flor
Palabras clave : Molienda de minerales;Relaves
Fecha de publicación : 2013
Editorial : Universidad Nacional de Ingeniería
Resumen : El presente informe desarrolla el tema de flotación de minerales de relaves magnéticos, lo cual se encuentra desarrollados en cinco capítulos, en el primer capítulo se plantea las consideraciones que se han tomado para realizar el presente estudio y se determinan los objetivos a alcanzar, el segundo capítulo se caracteriza la muestra de relaves magnéticos a tratar por flotación por espumas; en el tercer capítulo se plantea la parte experimental y los procedimientos llevados a cabo para obtener los datos necesarios para aplicar el diseño experimental que nos permitirá determinar la variables significativas que afectan la flotación para este caso; el cuarto capítulo plantea el diseño experimental y se procede a los cálculos de efectos y varianzas que nos llevaran a determinar un modelo matemático codificado que posteriormente será decodificado para obtener un modelo a escala natural en el que se construirán las superficies de respuesta de las variables significativas que nos permitirá predecir los resultados que se obtendrán al flotar dichos relaves magnéticos. En el capítulo cinco se discutirán y analizaran los resultados obtenidos que dan respuesta a los objetivos planteados. Este estudio se planteó pensando en obtener un mayor beneficio, al tratar los relaves magnéticos que poseen alto contenido plata cobre y plomo, que actualmente no se tratan y se dan a terceros. El trabajo se planteó aplicando diseño experimental para justificar de una manera correcta el trabajo realizado y no caer en presunciones empíricas que llevarían a cometer errores perjudiciales para el proceso.
This report develops the theme of flotation of tailings magnetic minerals, which is developed in five chapters. The first chapter presents the considerations that have been taken to carry out this study and determine the objectives to be achieved. Then, the second chapter gives a scope of material to be treated by flotation in this case are the tailings from magnetic concentrates. The experimental part and the procedures carried out to obtain the data necessary to apply the experimental design that allow us to determine the significant variables which affect the flotation in this case are developed in the third chapter. Moreover, the fourth chapter presents the experimental design and proceeds to the calculations of effects and variances to be taken to determine an encoded mathematical model which will then be decoded to obtain a full-scale model that which made the response surfaces of significant variables that let us to predict the results to be obtained by floating these magnetic tailings. Finally, the chapter five gives the conclusions comprising results that respond to the objectives. This study set out planning to get a greater benefit, treat magnetic tailings that have high content of minerals such as silver, copper and lead, which are currently not treated and given to third parties for this procedure.
URI : http://hdl.handle.net/20.500.14076/10348
Derechos: info:eu-repo/semantics/restrictedAccess
Aparece en las colecciones: Ingeniería Metalúrgica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
tapia_zr.pdf1,3 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons

Indexado por:
Indexado por Scholar Google LaReferencia Concytec BASE renati ROAR ALICIA RepoLatin UNI