Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/20.500.14076/17079
Título : Diseño de colada y proceso de fabricación de Bowl y Mantle en acero al manganeso ASTM a 128 grado E1
Autor : Espinoza García, Danny Cristhian
Asesor : Landauro Abanto, Alberto
Palabras clave : Manganeso;Fabricación de piezas en acero
Fecha de publicación : 2018
Editorial : Universidad Nacional de Ingeniería
Resumen : El presente trabajo pretende aportar conocimientos claros y prácticos, para la fabricación de piezas en acero al manganeso, tomando como base a un Bowl y Mantle en la aleación ASTM A 128 E1. El alcance de este trabajo será llegar a profesionales inmersos en la metalurgia de transformación, como a los metalurgistas que recién empiezan a forjarse un camino en este apasionado, y difícil mundo de la fundición de aleaciones, en particular de los aceros. La misión pues de este trabajo es inspirar también, a la investigación y al desarrollo de nuevas aleaciones, de nuevos procesos, que logren agregar valor a la industria metalúrgica del país. En la primera parte del trabajo, entenderemos la importancia del diseño de colada de las piezas a fabricar, así como el uso de un software de simulación. En el intermedio conoceremos todas las etapas del proceso de fabricación de Bowl y Mantle, desde la fabricación del modelo hasta el acabado final. En la última parte de este trabajo se analizará la calidad de las piezas; disponiendo de ensayos como: metalografía, ensayo de dureza, ensayo de resistencia a la tracción. Finalmente discutiremos las hipótesis planteadas, contrastando los datos obtenidos en los ensayos realizados. Seguramente dejaremos temas en el aire, en el tintero, o se harán ambiguos y confusos. No existe una verdad absoluta en cuanto a la fabricación de piezas en acero al Manganeso; sin embargo, este trabajo tiene también tiene como fin, plantear interrogantes que deberán ser serán resueltas por Metalurgistas que logren leer este trabajo.
The present work aims to provide clear and practical knowledge for the manufacture of parts in manganese steel, based on a bowl and mantle in ASTM alloy A 128 E1. The scope of this work will be to reach professionals immersed in metallurgy of transformation, as metallurgists who are just beginning to forge a path in this passionate, difficult world of the casting of alloys, in particular steels. The mission of this work is also to inspire, research and development of new alloys, new processes, which add value to the country's metallurgical industry. In the first part of the work, we will understand the importance of the casting design of the parts to be manufactured, as well as the use of simulation software. In the intermediate we will know all the stages of the manufacturing process of Bowl and Mantle, from the manufacture of the model to the final finish. In the last part of this work the quality of the pieces will be analyzed; having tests such as: metallography, hardness test, tensile strength test. Finally we will discuss the hypotheses, contrasting the data obtained in the tests carried out. Surely we will leave subjects in the air, in the inkwell, or they will become ambiguous and confused. There is no absolute truth regarding the manufacture of manganese steel parts; However, this work also aims to raise questions that must be resolved by metallurgists who can read this work.
URI : http://hdl.handle.net/20.500.14076/17079
Derechos: info:eu-repo/semantics/restrictedAccess
Aparece en las colecciones: Ingeniería Metalúrgica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
espinoza_gd.pdf8,96 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons

Indexado por:
Indexado por Scholar Google LaReferencia Concytec BASE renati ROAR ALICIA RepoLatin UNI