Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/20.500.14076/21415
Título : Recuperación de oro por gravimetría en concentrador centrífugo Falcon L-40 de mineral proveniente del distrito de Ollachea
Autor : Acosta Calderon, Juan Carlos
Asesor : Valverde Espinoza, Santiago Gualberto
Palabras clave : Recuperación de oro;Método gravimétrico;Minería informal
Fecha de publicación : 2020
Editorial : Universidad Nacional de Ingeniería
Resumen : En el presente trabajo de tesis se pretende determinar si es posible la recuperación de oro por el método gravimétrico con muestras tomadas cercanas al área de minería informal de Ollachea las cuales son en su mayoría rocas de pizarra filítica carbonosa que albergan mineralización del oro; la experimentación será realizada con un concentrador gravimétrico FALCON L-40 a nivel de laboratorio, este equipo es considerado según la bibliografía como uno de los más versátiles además de ello productivo en comparación con equipos tradicionales; dentro del equipo FALCON las partículas más pesadas son retenidas mientras que las más livianas son arrastradas por un flujo de agua las cuales son enviadas al área de descarga. Se probó la recuperación de mineral de oro con los factores: tamaño de partícula y numero de ciclos batch, este último se refiere a una metodología tipo cascada en donde se realiza un reproceso gravimétrico de las colas, en este proceso el primer ciclo del reproceso es el primer batch luego en el siguiente ciclo el relave es tomado como material fresco y así sucesivamente hasta llegar al último ciclo. Se concluye que la mayor recuperación de oro se obtiene con tamaño de partícula 74 μm y realizando 4 ciclos gravimétricos obteniéndose como recuperación en el primer ciclo 64.97%, en el segundo una recuperación acumulada de 75.15%, el tercer ciclo 79.73% de recuperación acumulada y en el cuarto una recuperación acumulada del 82.91% de mineral de oro siendo los parámetros estáticos: presión de agua 1 PSI, gravedad centrifuga 98 G´s. El porcentaje de recuperación obtenido en el concentrador gravimétrico FALCON sin duda alguna indica resultados interesantes para un proceso que no está involucrado al uso de reactivos tal es el caso de la cianuración en la lixiviación.
The aim of the present research is to determine if the recovery of gold is possible by the gravimetric method with samples taken from the informal mining area of Ollachea which are mostly carbonaceous phyllite slate rocks that harbor gold mineralization. The experimentation will be carried out with a FALCON L-40 gravimetric concentrator at laboratory level, this equipment is considered according to the bibliography as one of the most versatile, in addition to being productive compared to traditional equipment; within the FALCON equipment, the heaviest particles are retained while the lightest are carried by a flow of water, which are sent to the discharge area. The recovery of gold ore was tested with the factors: particle size and number of cycles per batch, the latter refers to a waterfall-type methodology where a gravimetric reprocessing of the tails is carried out, in this process the first cycle of the reprocessing it is the first batch then in the next cycle the tailings are taken as fresh material and so on until the last cycle is reached. It is concluded that the highest recovery of gold is obtained with the particle size 74 μm and performing 4 gravimetric cycles obtaining as recovery in the first cycle 64.97%, in the second an accumulative recovery of 75.15%, the third cycle 79.73% of accumulated recovery and in the fourth, a cumulative recovery of 82.91% of gold ore, being the static parameters: water pressure 1 PSI, centrifugal gravity 98 G's. The recovery percentage obtained in the FALCON gravimetric concentrator undoubtedly indicates interesting results for a process that is not involved in the use of reagents, such as cyanidation in leaching.
URI : http://hdl.handle.net/20.500.14076/21415
Derechos: info:eu-repo/semantics/restrictedAccess
Aparece en las colecciones: Ingeniería Metalúrgica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
acosta_cj.pdf3,69 MBAdobe PDFVisualizar/Abrir
acosta_cj(acta).pdf99,39 kBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons

Indexado por:
Indexado por Scholar Google LaReferencia Concytec BASE renati ROAR ALICIA RepoLatin UNI