Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/20.500.14076/625
Título : Génesis y controles litoestructurales del yacimiento polimetálico Invicta distrito Huaura – Lima
Autor : Huamán Guerrero, Alfonso Edmundo
Asesor : Carrascal Miranda, Eitel Rolando
Palabras clave : Estructuras mineralizadas;Geomorfología;Laboratorios
Fecha de publicación : 2010
Editorial : Universidad Nacional de Ingeniería
Resumen : El área de Invicta, se encuentra al norte de Lima en la cordillera occidental de los andes peruanos, dentro del eugeosinclinal de la cuenca geosinclinal andina del Mesozoico, en el contacto entre las rocas intrusivas del Batolito de la Costa y las rocas volcánicas del grupo Calipuy, localizándose las estructuras mineralizadas en ambas litologías, con metales económicos de Au, Cu, Ag, Pb y Zn de interés económico actual. En esta área el yacimiento Invicta, comprende i) la generación de las últimas pulsaciones de los intrusivos calcoalcalinos del Batolito de la Costa, con edades de alrededor de los 30 millones de años. La etapa inicial generativa del magmatismo del batolito, se remonta y relaciona con los movimientos compresivos orogénicos de la fase peruana ocurridos en el Cretácico superior con edades de aproximadamente de 100 millones de años. ii) la generación de las rocas volcánicas de la formación Calipuy, con edades algo menores a los pulsos de las soluciones hidrotermales generadas por los intrusivos. Aparentemente los pulsos magmáticos finales del batolito y de los volcánicos Calipuy, fueron impulsados por los movimientos de deformación compresiva de la fase Incaica durante el Terciario inferior a medio; iii) finalmente la generación de los fluidos hidrotermales a partir de las soluciones residuales ricas en iones metálicos y sílice, originadas en los últimos pulsos intrusionales del batolito, produjeron la mineralización del yacimiento Invicta. El estudio de inclusiones fluidas, muestra tres poblaciones de fluidos mineralizantes reconocidas por los distintos grados de temperatura que van desde los 150 a 450 ºC y salinidades que van de 0 a 21 % eq. peso NaCl, lo cual ha permitido una superposición de eventos con mineral de interés. Este hecho unido a la litología ígnea huésped favorable y a los sistemas de fallamiento como canales recolectores en la depositación de los fluidos mineralizantes, han favorecido la formación de este depósito mineral. Tentativamente se clasifica a Invicta, como un yacimiento de tipo Cordillerano, de origen epigenético fundamentalmente de rango mesotermal a epitermal. De acuerdo al diagrama de Wilkinson de homogeneización vs salinidad, muestra una compleja 8 distribución de la mineralización de este yacimiento, que cae principalmente en el campo mesotermal con gradación al campo epitermal.
Invicta area is located north of Lima in the western cordillera of the Peruvian Andes, within the eugeosyncline of the geosyncline Andean Mesozoic basin in the contact between the intrusive rocks of the Coastal Batholith and the volcanic rocks of Calipuy group, locating mineralized structures in both lithologies, with economic metals Au, Cu, Ag, Pb and Zn of current economic interest. In this area the mineral deposit of Invicta comprises i) the generation of the last pulse of calc-alkaline intrusions of the Coastal Batholith with ages around 30 million years. The initial phase of the batholith magmatism generative dates and related to compressive orogenic movements of the Peruvian phase occurred in upper Cretaceous with ages approximately 100 million years. ii) Generation of the volcanic rocks of Calipuy formation with ages somewhat lower than the pulses of hydrothermal solutions generated by the intrusive. Apparently the final pulses of the Batholith and the Calipuy volcanic was driven by movements of compressive deformation of the Inca phase during the lower to middle tertiary. iii) Finally the generation of hydrothermal fluids from the residual solutions rich in silica and metal ions, originated in the last intrusional pulses of the Batholith, and they originated the mineralization in mineral deposit of Invicta. The fluid inclusion study shows three populations of mineralizing fluids recognized by different temperature ranging from 150 to 450 ºC and salinities ranging from 0 to 21% eq. NaCl, which has allowed an overlay of events with mineral interest. This fact, together with favorable host igneous lithology and faulting systems as channels gatherer for the deposition of mineralizing fluids, have encouraged the formation of this mineral deposit. Invicta is tentatively classified as a Cordillerano mineral deposit type, of epigenetic origin mainly mesothermal to epithermal range. The Wilkinson diagram of salinity vs. homogenization shows a complex distribution of mineralization in this mineral deposit, which falls mainly in the mesothermal field with gradations to epithermal field. 10 The column previously recognized with economic mineralization in Atenea Vein is 600 m; with a paleorelief would be about 400 m above the present surface, making a total column of 1000 m. in the vertical. This fact and the different phase of mineralization superimposed with different degrees of temperature and salinity, open up important exploratory opportunities in depth, in Atenea vein mainly towards the southwest as well as in other veins, which will be pointing to the continuation of detailed investigations in the laboratory and confirmed by exploration with diamond drilling and other complementary studies.
URI : http://hdl.handle.net/20.500.14076/625
Derechos: info:eu-repo/semantics/restrictedAccess
Aparece en las colecciones: Maestría

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
huaman_ga.pdf12,41 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons

Indexado por:
Indexado por Scholar Google LaReferencia Concytec BASE renati ROAR ALICIA RepoLatin UNI